Enunciado

A large open tank is open to sea-level atmosphere and filled

with liquid, at 208C, to a depth of 50 ft. The absolute pressure at the bottom of the tank is approximately 221.5 kPa.

From Table A.3, what might this liquid be?

Passo 1

Saaaalve, tranquilo? Vamos lá resolver mais uma questão juntos?! 😊

Escrevendo a relação para calcular a pressão inferior usando a relação hidrostática

p i n f e r i o r = p a + ρ g H

Aqui, ρ i n f e r i o r é a pressão absoluta, p a é a pressão atmosférica, ρ é a densidade do líquido, g é a aceleração devido a gravidade e H é a profundidade do tanque

Substituindo valores

221500   P a = 101325   P a + ρ ⋅ 9,81   m / s 2 50 ⋅ 0,3048 f t ⋅ m f t

→ ρ = 803,82   k g / m 3

Passo 2

Identificando o tipo de líquido pela densidade da Tabela A-3

ρ k = 803,82   k g / m 3

Aqui, p k é a densidade do querosene

O líquido pode ser o querosene com essa densidade, da Tabela A-3

Resposta

Q u e r o s e n e

Exercícios de Livros Relacionados

Qual é a altura da coluna de mercúrio γ H g = 136.000N / m 3 que irá produzir na base a mesma pressão de uma coluna de água de 5m de altura? ( γ H 2 O = 10.000N / m 3 )
Suppose, which is possible, that there is a half-miledeep lake of pure ethanol on the surface of Mars. Estimate the absolute pressure, in Pa, at the bottom of thisspeculative lake.
Quito, Ecuador, has an average altitude of 9350 ft. On a standard day, pressure gage A in a laboratory experiment reads63 kPa and gage B reads 105 kPa. Express these readings ingage pressure or vacuum
Pressure gages, such as the bourdon gage in Fig. P2.4, arecalibrated with a deadweight piston. If the bourdon gageis designed to rotate the pointer 10 degrees for every2 psig of internal pressure, how